CEM Heated Filter Probes

The Clean Air Express CEM Heated Filter Probe has an integral filter chamber that will accept a glass fiber filter cartridge or a stainless steel sintered frit. Two stages of filtration may be achieved by using an in-stack course 20-micron SS frit on the probe end and a fine .02-micron filter in the chamber. The probe and filter chamber are heated by the same reliable standard silicone heater or an optional high temperature cable heater eliminating the need for multiple temperature controllers.
CEM Heated Filter Probes

CEM Heated Filter Probe Specifications

 
Disposable Filter Element
  • Silicone Heater Max Exposure Temperature: With SS frit 400°F
  • Cable Heater Max Exposure Temperature: With SS frit 800°F
  • Voltage: 120/240 Vac
CEM 2 Stage Heated Filter Probe with Silicone Heater (400°F)
Part Number
Item
2' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
4' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
6' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
8' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
10' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
12' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
CEM 2 Stage Heated Filter Probe with Cable Heater (800°F)
2' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
4' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
6' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
8' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
10' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
12' Effective CEM Heated Filter Probe with 20-micron SS Frit, Fiber Filter stem
CEM 2 Stage Spare Parts
Disposable Filter Element (99.99% removal of particulate and aerosols 0.01 microns in size)
900°F Disposable Filter Element (99.99% removal of particulate and aerosols 0.01 microns in size)
Stainless Steel Frit
Elements are specified for particulate removal where corrosive gases are to be filtered as they have excellent chemical resistance. They are also used when highly reactive gases are being analyzed since they exhibit very low levels of adsorption. The borosilicate microfiber provides relatively high flow rates with low pressure drops which is critical in any analytical application. The PVDF binder creates a non-reactive surface which allows accurate sample analysis.
Order Now- CEM 2 Stage Probe

Stainless Steel Frit Protector

Stainless Steel Frit Protectors
The Sintered Stainless Steel Fritted Filter is an excellent choice for keeping particulate out of your probes and lines. These 20 micron frits are cleanable and feature durable long lasting stainless steel construction with 1/4" NPT connection. By equiping a frit protrector with the stainless steel frited filter, the filter can be protected in harsh environments from accidental contact.
Part Number
Item
Image
Frit Protector for Part Number 0740F. 1" Tube with 180° of Coverage, No Holes
180 Frit Protector
Frit Protector for Part Number 0740F. 1" Tube with 360° of Coverage, Holes
360 Frit Protector
Order Now- Stainless Steel Frit Protector