Stainless Steel Sintered Filter / Sparger / Diffuser
|
The Sintered Stainless Steel Fritted Filter is an excellent choice for keeping particulate out of your probes and Heated Sample Lines. These 20 and 10 micron frits are cleanable and feature durable long lasting 316 stainless steel construction with 1/4" NPT or 3/8" tube connection. Used as a Sparger or Diffuser the sintered metal introduces gases into liquids through thousands of tiny pores, creating bubbles far smaller and more numerous than with drilled pipe or other sparging methods. |
|
- 2.7 cfm @ max open flow rate (20 micron) 1.5 cfm for (10 micron)
- 750°F in a oxidizing environment
- 1000°F in a non-oxidizing environment
- 316L Stainless Steel Construction
- Standard: ~ 63 grams in weight
- Heavy Duty: ~ 98 grams in weight
|
The Stainless Steel Sintered Filter can also be used as a Sparger and Diffuser. These Stainless Steel Diffusers often used for porouse gas injecting have a 20 or 10 micron pore size allowing small bubbles to flow through it. They can be used for gas transfer aeration generating high volumes of fine, uniform bubbles often used for the treatment of wasewater, volatile stripping and steam injection. With greater gas/liquid contact area, the time and volume required to dissolve gas into liquid is reduced. This is accomplished by reducing the bubble size, which creates many tiny, slow moving bubbles that result in a large increase in absorption. |
|
|
Custom Stainless Steel Frits/ Stainless Steel Diffuser
|
 |
- *Additional lengths (1" and 2") are Available. Please call for availabilty and Pricing.
|
Stainless Steel Frit Protector
|
|
|
The Sintered Stainless Steel Fritted Filter is an excellent choice for keeping particulate out of your probes and lines. These 20 micron frits are cleanable and feature durable long lasting stainless steel construction with 1/4" NPT connection. By equiping a frit protrector with the stainless steel frited filter, the filter can be protected in harsh environments from accidental contact. The frit protector seals with a 1" compression fitting design to fit on Clean Air's CEM Probe. |
Part Number |
Item |
Image |
0740FP |
Frit Protector for Part Number 0740F. 1 1/2" Tube with 180° of Coverage, No Holes |
|
0740FPRO |
Frit Protector for Part Number 0740F. 1 1/2" Tube with 360° of Coverage, Holes |
|
|
|
|
|
