Heated Sample Lines
|
|
|
Heated Sample Lines are used with: |
-
Note: Heavy Duty Heated Sample Lines HD are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of -20°F.
-
Note: Standard Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of 0°F.
|
|
|
Heated Sample Line Features: |
-
Rated for 400 º F continuous operation at -20 º F ambient temperature
-
Triple insulation maintains temperature of line with less power consumption. (Heavy Duty)
-
Lower resistance heaters requires less power to heat lines.
-
A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field.
-
Stainless steel over braid and stainless steel tube ends for the sample line to prevent abrasive failure in the field. Optional stainless steel over braid for protection of calibration line from abrasive failure in the field.
-
Durable extruded poly-urethane jacket for protection of sample/calibration lines from abrasive failure in the field.
-
Inert teflon ® PTFE sample and calibration lines will provide more accurate results by eliminating potential bias from other materials. Teflon is also more corrosion resistant than tygon, and can be washed with acetone without degradation.
|
Part Number |
Voltage |
Watts |
Length/FT |
Amperage |
|
120 |
300 |
10' Heated Sample Line |
2.73 |
|
120 |
750 |
25' Heated Sample Line |
6.82 |
|
120 |
1500 |
50' Heated Sample Line |
13.64 |
|
120 |
2500 |
100' Heated Sample Line |
22.73 |
|
120 |
3000 |
100' Heavy Duty Heated Sample Line |
27 |
|
120/240 |
N/A |
100' Dual Voltage Heated Sample Line |
N/A |
|
Universal Temperature Controller
|
Custom lengths, voltage, and configuration available |
*Heavy Duty are manufactured to have a continuous operating temperature of 400°F (~204°C) at -20°F ambient |
|
These Heated Sample Lines may be rented through CleanAir Rentals |
|