Teflon ® PTFE Tubing
|
|
|
-
1/4" Teflon ® PTFE Tubing Colors Stocked are Black, Blue, Gray, Green, Orange, Natural (White), Red and Yellow. If you need another color or size please call.
-
1/8", 3/8", 1/2" and 5/8" Teflon ® PTFE Tubing are only available in Natural (White) color. If you need another color please call.
-
** Teflon ® PTFE Tubing Bend radius is for room temperature bends. Heating tube to soft point prior to bending is best for permanent bends.
-
Continuous Teflon ® PTFE Tubing lengths over 100 feet ship approximately four weeks after order.
-
Teflon ® PTFE Tubing continuous lenghts of 250 ft are now available in 1/8", 1/4" and 3/8" Teflon ® PTFE Tubing.
-
-
-
Laboratory applications: Teflon ® PTFE tubing is used in various laboratory applications because of it's chemical resistance, and inertness. Teflon ® is the best way to prevent contaminants from adhering to a surface.
|
|
|
|
|
|
|
|
|
|
CleanAir Products with Teflon ® (PTFE): |
|
Teflon ® (PTFE) Tubing applications: |
- Automotive: Pure Fluid/Air Systems
- Chemical: Laboratory, chemicals, corrosives
- Electrical: Wire Insulation
- Medical: High purirty transfer lines
- Other: Water transfer/sampling, food
|
|
Clean Air Express Teflon ® (PTFE) Tubing: |
Description: Teflon ® PTFE tubing is flexible tubing that is resistant to crimping and blockage. This is the preferred teflon tubing for emissions measurement below 500F. For tube diameters or colors not listed here, please call. Material: Heavy Wall Polytetraflouroethylene (PTFE) Teflon ® Tube. |
Teflon ® is a registered trademark of DuPont. Teflon ® is the brand name for the Dupont fluoropolymer plastic resins PTFE, FEP, and PFA. These three are very similar in composition, temperature limit and chemical resistance but have slightly different mechanical properties that make each one better suited for some specific applications. PTFE is best for most gas sampling. |
Tube OD |
Tube ID |
Tube Wall |
Part Number |
Color |
Bend Radius ** |
1/8" |
1/16" |
~0.031 |
|
Natural(White) |
<0.3" |
1/8" |
1/16" |
~0.031 |
|
Natural(White) |
<0.3" |
1/4" |
1/8" |
~0.062 |
|
Natural(White) |
<0.5" |
1/4" |
1/8" |
~0.062 |
|
Specify * |
<0.5" |
1/4" |
1/8" |
~0.062 |
|
Natural(White) |
<0.5" |
3/8" |
1/4" |
~0.062 |
|
Natural(White) |
<1.0" |
3/8" |
1/4" |
~0.062 |
|
Natural(White) |
<1.0" |
1/2" |
3/8" |
~0.062 |
|
Natural(White) |
<2.0" |
5/8" |
1/2" |
~0.062 |
|
Natural(White) |
<4.0" |
|
|
|